Skip to main content

My Diary at Indonesian-Aerospace Company - Day 1

Today is my first day of practical work programme in PT. DI (or Indonesian-Aerospace Company).
PT. Dirgantara Indonesia (PT. DI) is an Indonesian state owned enterprise that was established in 1976. PTDI manufacturing site is in Bandung, Indonesia.
The company main products are aircrafts, aircraft structure component, aircraft services, and engineering. PTDI Assembly Lines produce various types of CN235 under TC for civil or military transport, maritime patrol, surveillance, and coast guard... (You can see more about PT. DI's informations here. Yes, right here)
At this first day, there was non such a lot of things to do, actually.
At first, I was so nervous as this is my first time I was gonna work on such a real company, and I was worried if it wasn't gonna be what I was expected.
In the morning, I woke up early, really early (and I was surprised I could do that... :D ) as I didn't wanna my first day to be broken by coming late. yeah Alhamdulillah, Allah helped me... And, yes, we were not late, instead, we were coming tooo early (we were arrived at 7 am and they told us to come at 8 am). Haha. But it was okey...
Something that really bothering me was we were mentioned to make the ID card soon before this first day, but we didn't do that as, you know, we kind of forget about that. So we decided to go to Miss Illa to register and make an ID card and it would be able to be taken tomorrow, so we just straight went to Miss Soniah as our preceptor. But, she told us, as the ID card was not ready yet, we should come tomorrow when that ID card is ready... So that's it for today, and she let us home... :D
Horray...
And I hope, tomorrow will be facile and Allah helps us to do this practical work...
Amiin...
/bye

Comments

Popular posts from this blog

[Arduino Project -- 5] -- Using Keypad and LCD Screen at Once to make simple Calculator

Good day. This is my fifth times of my post about Arduino. We've learned about how to create something using Arduino from the very beginning that was just make a simple push button, till we made something more difficult which was creating a temperature censor and displaying the result in the LCD screen. And now, i'm gonna show you how to use a keypad and LCD Screen at once. With these two devices are combined with our Arduino, we are able to make something like a little application. And now, i'm gonna make a simple calculator using them. Stuffs: These are stuffs you are gonna need to prepare An Arduino Uno A BreadBoard Jumper Cables A Keypad A PC which has Arduino App Installed A Potensiometer A Resistor What do we do? First thing we gotta do is to wire our Arduino and keypad as shown below: Actually we dont need the speaker and the led. But I put them when i wired them. And here is my work: It was a little bit confusing i thought. And aft

[Arduino Project-2] -- Lampu Fade in - Fade out dengan PWM

Good Day, Semoga hari-hari selalu menjadi hari baik bagi kita semua. Masih kesengsem sama Arduino, pada postingan kali ini saya akan menjelaskan (kalau bisa disebut) mempraktikan cara membuat lampu LED yang bisa nyala terang dan gelap (fade-in / fade-out ) dengan PWM. Yang akan kita lakukan adalah membuat lampu LED berubah tingkat terangnya (brightness). Sebelumnya kita perlu tahu apa itu PWM. PWM atau Pulse Width Modulation adalah teknik yang dilakukan untuk mengubah tingkat ke terang an (brightness) LED dengan cara mengatur waktu delay. Jika kita memberikan delay pada LED dengan Arduino maka lampu tersebut akan berkedip. Akan tetapi jika delay sangat cepat, maka lampu tersebut terlihat tidak berkedip lagi, melainkan kita bisa mengatur tingkat terang (brightness) lampu tersebut. Jika delay yang sangat cepat tersebut diturunkan kecepatannya sedikit, maka yang terlihat adalah brightness lampu yang turun. Begitu pula sebaliknya. Jika membingungkan, Anda tidak perlu mengingatnya. Baiklah

[Arduino Project-1] -- PushButton Lamp

Apa sih Arduino? Salam, Pada posting kali ini akan menjelaskan tentang tugas kuliah Interaksi Manusia dengan Komputer dan Antar Muka, yaitu membuat lampu push button menggunakan Arduino. Saya anggap pembaca telah mengetahui apa itu arduino. Jika belum tahu, akan saya jelaskan sedikit. Arduino bisa dikatakan sebagai alat untuk membuat sebuah prototye. Kita bisa  membuat apapun (hampir apapun) dengan menggunakan arduino. Seperti membuat sensor panas/dingin,bahkan hingga membuat robot. Arduino sebenarnya diperuntukkan bagi para artist maupun designer yang memerlukan kemudahan dalam merancang produk yang hendak mereka buat. Jadi, untuk menggunakannya tidak diperlukan keterampilan khusus yang tinggi karena di design untuk kemudahan (tentunya setelah tahu dasar-dasarnya). Seperti apa sih Arduino itu? Di bawah ini gambarnya Image Source: https://dlnmh9ip6v2uc.cloudfront.net//images/products/1/1/0/2/1/11021-01a.jpg Arduino ada banyak jenisnya yang bisa dilihat di